Page 403 - Window and Door Hardware Catalog

HTL ULTIMATE 2-D HINGE
Steel Reinforcements - Makes this new hinge the "Ultimate" with door systems. ! Simple Door Preparation - Quick and easy one pass routing.
! Corrosion Resistant - Specially coated components for improved ! Variety of Finishes - Available in finishes to match your HOPPE® handle sets.
durability and strength. ! Designed to carry up to 165 lbs. per door.
! Easy Adjustment - Set hinge has a vertical adjustment feature (+/- 2.5mm) ! Not to be used in commercial applications, especially not in
Guide hinge has a horizontal adjustment feature (+/- 2mm). conjunction with a door closer.
! Maintenance Free Bearings - No oiling required.
! Security - Non-removable pin (NRP) available for increased security.

Set Hinge Steel Set Hinges with Non-Removable Pin Guide Hinge Steel Guide Hinges with Removable Pin
Part # Finish Part # Finish
850-8762439 Polished Brass 850-8762435 Polished Brass
850-8762455 Polished Chrome 850-8762451 Polished Chrome
850-8762703 Brushed Chrome 850-8762699 Brushed Chrome
850-8762439 KTL Brass Alternative 850-8762435 KTL Brass Alternative
850-2307831 Rustic Umber 850-2307823 Rustic Umber
850-8762535 Matte Black 850-8762531 Matte Black
Brass Set Hinges with Non-Removable Pin Brass Guide Hinges with Removable Pin
Part # Finish Part # Finish
850-8762655 Polished Brass 850-8762651 Polished Brass
850-8762671 Antique Brass 850-8762667 Antique Brass
Stainless Steel Set Hinges with Stainless Steel Guide Hinges with
Non-Removable Pin Removable Pin
Part # Part #
850-8762567 850-8762563

COLUMBUS 2-D HINGE FOR WOOD AND VINYL PRODUCTS

850-8755047 850-8755099
Set Hinge Guide Hinge
No Longer Available. No Longer Available.
Use 56-224PB. See Page 435 Use 56-223PB. See Page 435
For Additional Finishes, See Part Numbers 56-224 and 56-223 on Page 435.
Settling of walls and floors can make door panels hard to open and close. The 2-D Adjustable Hinge allows easy adjustment of the door both horizontally (+/-2 mm)
and vertically (+/-3 mm) with just the turn of a screw. Each hinge is reversible and has maintenance free bearings.

There are two types of adjustable hinges for each door panel.
A. Set Hinge: One per panel. This has vertical adjustment ( 3mm).
B. Guide Hinge: Minimum of two per panel. These hinges only have the horizontal adjustment ( 2mm.)

The guide hinges float up and down with the adjustment of the set hinge to prevent hinge binding.
Normal hinge replacement has the set hinge. Using a Phillips screwdriver, first adjust the panel up or down by turning the screw marked "V" on the set hinge. When turning the
screw in the direction of the arrow (counter clockwise) the other leaf will be pushed in the direction of the arrow. Automatic screwdrivers are not recommended. The speed of the
gun may strip the heads if the screws are over adjusted.
When the vertical adjustment is turned clockwise, the non-adjustable leaf will move in the direction of the arrow. The vertical adjustment has 32 turns from its extremes, and
the horizontal has 7 turns.

Adjust the horizontal by turning clockwise to increase the margins. Turn counter clockwise to decrease the margins.
403
© 2023 PGI.