Page 499 - Window and Door Hardware Catalog

Lifting Devices

CARRYMATE® NON-SLIP PANEL GRIPS
Protects your hands, prevents back strain and improves productivity!

The unloading and transport of sheet materials to their installation sites is not only time-consuming but also very strenu-
ous. Smooth surfaces make it difficult to securely carry the material, especially through narrow passages or across uneven
grounds. Carrymate Safety Grips are used in pairs and each grip is capable of holding up to 220 lbs, which makes them
®
suitable for moving a wide variety of materials.
! The point of contact to the material can be wherever it is most suitable for each user's height
! Both users can walk forward and face the direction they are going in
! The user's lifting arm and back remain straight
! The user's other hand is now free to support the material or to move obstacles to the
side (open doors, etc.)
The clamping system self-adjusts to the width of the material and securely holds it in place without damaging its surface.
All parts of the Carrymate Transport Grips that touch the load are covered with a special coating so that even the most
®
polished materials will not be scratched. The ergonomically designed carrying grip provides a secure hold and even during
turns and pivots the user can easily hold on to the load.
! Sturdy aluminium construction
! Self-adjusting non-slip Clamps
! Holds up to 220 lbs. per grip - sold in pairs
! Cushioned shaft prevents damage to the carried load
59-177
CARRYMATE® 5 Span width 0-3.15" (Pair)
59-177-OXO120
Carrymate® OXO With 40-120mm. Wider Support
Surface. Used For Picking Up Full Units

Suitable for:
Glass/IGUs (double/triple)
Sheet metal 59-177X
Plywood/Dry Wall Carrymate® X-Spanders. Simply
PVC slip the X-Spanders over the
Solar modules clamps! No glue is
Natural stone, etc. necessary! Sold in packs of 8.

GRABO-PRO LIFTER KIT -20
Part # 59-191
GRABO-PRO Pro-Lifter-20 Kit Includes 1 GRABO,1 Charger Carrying Case.
Smart Digital Pressure Sensor & Auto Start

GRABO Pro-Lifter comes as a complete unit, with pre-installed battery and vacuum seal.
That is not all. There are other accessories in the kit, including a multi-socket charger and a heavy
duty carry bag. The complete kit is packaged in a functionally designed colorful box.
Package Contents:
! 1 GRABO Pro tool (2021 model with digital display)
! 1 multi-socket charger
11.77" L x 7.22" W x 4.76" H ! 1 seal (pre installed on the tool)
! 1 battery (pre installed on the tool)
! 1 tough Oxford fabric carry bag
To lift any slab of flat solid material, simply turn on the unit and ! Operator's manual in English
place it straight on the surface. The GRABO Pro automatically
monitors the vacuum and if vacuum pressure is lost the pump is GRABO Pro is equipped with a robust vacuum pump. The foam rubber vacuum seal on the GRABO
automatically powered up until the vacuum pressure is restored.
Pro tool is strong and resistant to loss of vacuum pressure. Once the pressure pump is activated,
it creates a strong suction and firmly attaches to any non-porous flat surface. The suction is strong
enough to hold firm even loads as heavy as 375 lbs.

Extra Battery Available.
Part # 59-191B

499
© 2023 PGI.