Page 496 - Window and Door Hardware Catalog

CommerCial Door/Storefront HarDware

NARROW STILE EXIT DEVICES
CONCEALED VERTICAL ROD Exit Device Trims
These panic devices blend the utility of a vertical rod application
with the appearance of a traditional panic device. It is non-handed
and reversible with a contoured cross bar that will fit doors up to
42" wide and can be field sized to accommodate narrow doors.

Grade - ANSI A156.3 Grade 2 Brass Mortise Cylinder
Part # Finish
19-755 Aluminum
19-755BZ Bronze
Zinc Mortise Cylinder
Part # Finish
Part # Finish 19-410 Aluminum
19-754 Aluminum 19-410BZ Bronze
19-754BZ Bronze

FEATURES ! DOOR THICKNESS: 1-3/4" standard
! MATERIAL: Contoured anodized aluminum cross ! DOOR WIDTH: Up to 42"
bar, stainless steel springs ! MOUNTING HEIGHT: 35-11/16" from floor to
! LATCH CASE: 1-1/4" wide x 7-1/4" long center line of the bottom latch case mounting
! DOOR HEIGHT: 7' standard stud
! BACKSET: Center template on narrow door stile ! FASTENERS: Furnished with sheet metal,
! STRIKE: Top-flat mortise, Bottom-flat mortise or machine screws and shoulder mounting studs
directly through threshold with set screws Cylinder Mounting Trim
! PROJECTION: 4-3/4" ! CYLINDER: Accepts mortise type Part # Finish
! STILE: 1-7/8" minimum ! DOGGING: Inside- push up dog pin and rotate 19-756 Aluminum
! HANDING: Reversible, non-handed with screwdriver, Outside- by key cylinder
*For exterior key application must order
19-756/19-756BZ. Insert mortise cylinder in
mounting trim and secure with locking ring
nut, included.
TOUCH BAR Exit Device Trims

These "crash bar" style exit devices are suitable for narrow,
medium or wide stile aluminum and hollow metal doors.
Contoured cross bar that will fit doors up to 42" wide and
can be field sized to accommodate narrow doors.

Part # Finish Hand Grade - ANSI A156.3 Grade 2
19-747RH Aluminum Right
19-747LH Aluminum Left Rim Cylinder Exit Only Plate
19-748RHBZ Bronze Right Part # Finish Part # Finish
19-748LHBZ Bronze Left 19-568 Aluminum 19-751 Aluminum
19-568BZ Bronze

*For Left Hand Reverse Door; order RH device
*For Right Hand Reverse Door; order LH device

FEATURES ! DOOR WIDTH: Up to 42"
! MATERIAL: Contoured anodized aluminum cross bar, ! MOUNTING HEIGHT: Recommended installation
stainless steel springs at 39-13/32" from floor to center line of latch or
! LATCH CASE: 1-1/4" wide x 7-1/4" long with 1/2" strike assemblies
stainless throw ! FASTENERS: Furnished with sheet metal, machine
! BACKSET: 1-5/32" from edge of door to center line screws and shoulder mounting studs with set screws Pull Trim Dummy Pull Trim
of device ! CYLINDER: Accepts rim cylinder only Part # Finish Part # Finish
! STRIKE: Rim mounted roller strike with shim ! DOGGING: Inside-push up dog pin rotate with
! PROJECTION: 4-3/4" screwdriver, Outside-by key cylinder 19-749 Aluminum 19-750 Aluminum
! STILE: 1-7/8" minimum
! HANDING: Handed, please specify RH or LH *All trim applications for new door or existing hole
! DOOR THICKNESS: 1-3/4" standard less than 1-3/16"

496
© 2023 PGI.