Page 414 - Window and Door Hardware Catalog

MULTIPOINT HARDWARE SWING DOOR QUESTIONNAIRE

Acct. #: ____________________________________________________ Date: _________________________________________________________
Customer Name: ____________________________________________ Phone: _______________________________________________________
Address: ___________________________________________________ Fax: __________________________________________________________
___________________________________________________________ Email: ________________________________________________________
1. Is the faceplate stamped with G-U or Ferco?  G-U  Ferco Other: _______________________

2. Is this for a single door or a pair of doors (French doors)? _______________________________
3. What is the door thickness? -3/4" (45mm)  2-1/4" (57mm) Other:_______________
4. Do you know who manufactured your door? _________________________________________ Do you know the age of your door? __________
5. What is the finish/color of your Multipoint system?
 Painted Silver (Ferguard)  Stainless Steel  Yellow Dichromate (Brass looking)
 Black Matte  White
6. What is the distance from the center of the handle to the center of the key cylinder?
 2-7/32" (56mm)  2-3/4"(70mm)  3-5/8" (92mm, Standard) Other: ______________________________

7. What is the door panel height (the door panel is the part that opens and closes)? ______________
8. Is this a “Manual" (locks are engaged by lifting lever upwards) or “Automatic" (locks engage automatically when you close the door) system?  Manual.  Automatic.
9. What is the width across of this metal faceplate?  5/8" (16mm)  25/32" (20mm) Other _________________________________
10. Are the faceplate ends:  Square or  Radius/Round?
11. Is the key cylinder located above (American version) or below (European version) the handle? _________________
12. Does the teardrop on your mortise gear box take a full cylinder or is there an insert in the round part of the teardrop that accepts a tailpiece to engage the deadbolt?
 Full Cylinder  Insert Accepts Tailpiece (see picture of single point locks on following page)
13. Backset: What is the horizontal distance from the center of the handle to the door edge (edge with the latch and deadbolt on it)?
 1-3/16" (30mm)  1-3/8" (35mm)  1-9/16" (40mm)  1-3/4" (45mm)
 2" (50mm)  2-3/16" (55mm)  2-3/8" (60mm)  2.55"(65mm)
14. Based on the locking options on the following page, please put an “X" by the name of your G-U Multipoint System:
American Version (Key Above Handle)
 Wolverine: Manual 3-point locking system (Active Door)  Hawk: Semi-Automatic 3-point locking system
Top & Bottom Shootbolt and Deadbolt 2 Additional Latches and Deadbolt
 Wolverine: Manual 2-point locking system (Inactive Door)  SH2 (Rhino): Swing Hook System
Top & Bottom Shootbolt
Other: _________________________________________
 Eagle: Automatic 3-point locking system (Secury US)
2 Additional Latches and Deadbolt
European Version (Key Below Handle)
 Cremona: Manual 3-point locking system (Active Door)  Tripact: Manual 3-point locking system
Top & Bottom Shootbolt with Latch and Deadbolt 2 Hook/Tongue Bolts and Deadbolt
 Cremona/Europa: Manual 2-point locking system (Inactive Door)  Tripact/Cremona: Manual 5-point locking system
Top & Bottom Shootbolt without Latch and Deadbolt 2 Hook/Tongue Bolts, Top & Bottom Shootbolt and Deadbolt
 Rhino: Manual 3-point locking system  Europa R2: Manual 5-point locking system
2 Horn Type Bolts and Deadbolt 2 Rollers, Top & Bottom Shootbolt and Deadbolt
 Rhino: Manual 5-point locking system  Secury Euro: Automatic 3-point locking system.
2 Horn Type Bolts, Top & Bottom Shootbolt and Deadbolt 2 Additional Latches and a Deadbolt.
REFER TO MEASURING GUIDELINES ON FOLLOWING PAGE TO ANSWER QUESTIONS BELOW

15. DEADBOLT THROW: Is the throw on the deadbolt  1"(25.4mm) or  3/4" (19.05mm)
16. HANDLE HEIGHT: The distance from the center of the door handle to the bottom edge of the door is:  35"(889mm)  36"(914.4mm) Other: __________
17. BOTTOM LOCK POSITION “A": What is the distance from the center of the handle to the center of the bottom locking point? _________________ (See image 1. on next page)
18. TOP LOCK POSITION “B": What is the distance from the center of the handle to the center of the top locking point? _________________ (See image 1. on next page)
(Your actual lock may look different).

414
© 2023 PGI.