Page 262 - Window and Door Hardware Catalog

WindoW Replacement HaRdWaRe

CASEMENT HINGES
TRUTH 14 CONCEALED CASEMENT HINGE

Truth Part # Finish Our Part # "A" "C" "D" "L" Arm & Rivet Attachment
14.05 E-Gard 28-15-37 (LL-UR) / 28-15-38 (UL-LR) 4-29/32 9-5/8" 4-15/16" 10" Steel Adjustable Brass Snap-Stud
14.06 E-Gard 28-15-43 (LL-UR) / 28-15-44 (UL-LR) 5-17/32" 9-5/8" 4-15/16" 10" Steel Adjustable Brass Snap-Stud
14.08 E-Gard 28-15-49 (LL-UR) / 28-15-50 (UL-LR) 6-15/16" 13-5/8" 4-51/64" 14" Steel Adjustable Brass Snap-Stud
14.75 E-Gard 28-15-5 (LL-UR) / 28-15-6 (UL-LR) 4-29/32" 9-5/8" 4-15/16" 10" Steel Standard Brass Snap-Stud
14.80 Stainless Steel 28-15-5SS (LL-UR) / 28-15-6SS (UL-LR) 4-29/32" 9-5/8" 4-15/16" 10" Stainless Steel Stainless Steel Snap-Stud
14.76 E-Gard 28-15-7 (LL-UR) / 28-15-8 (UL-LR) 5-17/32" 9-5/8" 4-15/16" 10" Steel Standard Brass Snap-Stud
14.91 Stainless Steel 28-15-7SS (LL-UR) / 28-15-8SS (UL-LR) 5-17/32" 9-5/8" 4-15/16" 10" Stainless Steel Stainless Steel Snap-Stud
14.77 E-Gard 28-15-9 (LL-UR) / 28-15-10 (UL-LR) 2-9/32" 9-5/8" 4-15/16" 10" Steel Standard Brass Snap-Stud
14.93 Stainless Steel 28-15-9SS (LL-UR) / 28-15-10SS (UL-LR) 2-9/32" 9-5/8" 4-15/16" 10" Stainless Steel Stainless Steel Snap-Stud
14.17 E-Gard 28-15-1 (LL-UR) / 28-15-2 (UL-LR) 6-15/16" 13-5/8" 4-25/32" 14" Steel Standard Brass Snap-Stud
Not for Use on Awning Windows.

Screws sold separately.
Arm Screws: 20-136
Track Screws: 20-142
LL-UR Hinge Shown (Viewed from Outside)
Instructions for Sash Adjustment
1. The amount of sash sag that the HP hinge will correct for is dependent on the ratio of the sash width vs. sash height. To calculate the amount of drag adjustment for any
given sash size, take the ratio of width to height multiplied by 1/16". Example: Sash size equals 24" x 36", width to height ratio is .667.
Total adjustment is .667 x 1/16" = .042 (approx. 3/64").
2. To adjust a casement sash, first fully open the casement window. Next, loosen the two screws in the bottom hinge adjustment block approximately three turns (do not
remove screws). Next, move heel of the sash towards the lock side of the window and re-tighten screws. For severe sash drag, repeat this procedure to the top hinge,
except the adjustment is made by shifting the top of the window away from the lock side.
CONCEALED MAXIM® HINGES
14.97 Washability Hinge has the ability to support a 40" x 84" sash weighing up 14.12 Egress Hinge has the ability to support a sash weighing up to 69 lbs.,
to 96 lbs., when used with the Maxim® Dual Arm Operator. when used with the Maxim® Dual Arm Operator.

Truth Part # Part # Hand Finish A
14.97 28-15-39 Shown E-Gard 7/16"
14.97 28-15-40 Opposite E-Gard 7/16"
14.97 28-15-39SS Shown Stainless Steel 7/16"
14.97 28-15-40SS Opposite Stainless Steel 7/16" Truth Part # Part # Hand
14.92 28-15-57 Shown E-Gard 1/2" 14.12 28-15-41 Shown E-Gard
14.92 28-15-58 Opposite E-Gard 1/2" 14.12 28-15-42 Opposite E-Gard
14.92 28-15-57SS Shown Stainless Steel 1/2" 14.12 28-15-41SS Shown Stainless Steel
14.92 28-15-58SS Opposite Stainless Steel 1/2"
14.12 28-15-42SS Opposite Stainless Steel
262
© 2023 PGI.